BUTTERFLY VALVES – Enproengineers

BUTTERFLY VALVES – WAFER & LUG TYPES

DESIGN

WAFER & LUG TYPES

DIMENSIONS

Dimensions in mm, weights in kg.

Dimensions and weights are given as a guide.

On request.

DN							Actuator flange						Key			Wafer type			Full Lug type
Size	B	C	E1	E2	ØF	G	H	J	ØK	L	M	N	a	b	I	A	D	Weights	A	D	P	Weights
50	74	43	25.5	–	11	–	14	90	–	70	9	4	–	–	–	110	94	2.8	152	153	38	3.7
2”	2.91	1.7	1	–	0.43	–	0.55	3.54	–	2.76	0.35					4.33	3.70	6.17	5.98	6.02	1.50	8.16
65	81	46	25.5	–	11	–	14	90	–	70	9	4	–	–	–	118	107	3.3	159	173	40	4.2
2” 1/2	3.19	1.81	1	–	0.43	–	0.55	3.54	–	2.76	0.35		–	–	–	4.64	4.21	7.28	6.26	6.81	1.57	9.26
80	93	46	25.5	–	11	–	14	90	–	70	9	4	–	–	–	125	126	4	166	188	40	7.1
3”	3.66	1.81	1	–	0.43	–	0.55	3.54	–	2.76	0.35		–	–	–	4.92	4.96	8.82	6.54	7.39	1.57	15.65
100	107	52	25.5	–	14	–	16	–	100	102	11	4	–	–	–	140	150	6	182	219	45	8.7
4”	4.21	2.05	1	–	0.55	–	0.63	–	3.94	4.02	0.43		–	–	–	5.59	5.91	13.23	7.16	8.61	1.77	19.18
125	122	56	25.5	–	14	–	16	–	100	102	11	4	–	–	–	160	179	8.5	193	252	48	11
5”	4.80	2.20	1	–	0.55	–	0.63	–	3.94	4.02	0.43		–	–	–	6.30	7.05	18.74	7.60	9.92	1.89	24.25
150	140	56	25.5	–	19	–	17	–	100	102	11	4	–	–	–	175	204	11	217	278	48	15
6”	5.31	2.20	1	–	0.75	–	0.67	–	3.94	4.02	0.43		–	–	–	6.88	8.03	24.25	8.54	10.93	1.89	33.06
200	167	60	25.5	–	19	–	17	–	100	102	11	4	–	–	–	206	259	15	242	335	52	22
8”	6.57	2.36	1	–	0.75	–	0.67	–	3.94	4.02	0.43		–	–	–	8.11	10.20	33.07	9.53	13.17	2.05	45.50
250	203	68	36	90.5*	27	35	17	–	132	125	14	4	10	8	65	247	313	23	280	400	60	33
10”	7.87	2.68	1.42	3.56	1.06	1.38	0.67	–	5.20	4.92	0.55		0.39	0.31	2.56	9.72	12.32	50.71	11.02	15.73	2.36	72.75
300	233	78	36	90.5*	27	35	17	–	132	125	14	4	10	8	65	277	369	31	310	470	70	44
12”	9.17	3.07	1.42	3.56	1.06	1.38	0.67	–	5.20	4.92	0.55		0.39	0.31	2.56	10.89	14.53	68.34	12.20	18.48	2.76	97.00
350	270	78	36	90.5*	27	35	17.5	–	132	125	14	4	10	8	65	300	418	39	350	520	70	67
14”	10.63	3.07	1.42	3.56	1.06	1.38	0.69	–	5.20	4.92	0.55		0.39	0.31	2.56	11.81	16.46	85.98	13.78	20.45	2.76	147.50
400	300	102	43	90.5*	32	40	21	–	132	140	18	4	12	8	73	345	467	69	375	588	90	104
16”	11.81	4.02	1.69	3.56	1.26	1.57	0.83	–	5.20	5.51	0.71		0.47	0.31	2.90	13.58	18.39	152.12	14.76	23.12	3.54	229.28
450	330	114	49	100*	36	50	22	–	140	140	18	4	14	9	60	375	521	83	400	633	100	136
18”	12.99	4.49	1.93	3.93	1.42	1.57	0.87	–	5.51	5.51	0.71		0.55	0.35	2.56	14.76	20.51	182.98	15.75	24.89	3.94	299.83
500	375	127	63	102*	46	60	25	210	–	165	22	4	18	11	80	425	571	107	425	704	113	180
20”	14.76	5.00	2.48	4.02	1.81	2.36	0.98	8.27	–	6.50	0.87		0.71	0.43	3.15	16.73	22.48	235.89	16.73	27.68	4.45	396.84
600	430	154	63	102*	46	60	25	210	–	165	22	4	18	11	80	495	670	145	495	828	140	260
24”	16.93	6.06	2.48	4.02	1.81	2.36	0.98	8.27	–	6.50	0.87		0.71	0.43	3.15	19.49	26.38	319.67	19.49	32.56	5.51	573.20
700	510	165	81	110*	55	80	30	300	–	254	18	8	22	14	100	570	776	217	570	895	150	280
28”	20.08	6.50	3.19	4.33	2.16	3.15	1.18	11.81	–	10.00	0.71	8	0.87	0.55	3.94	22.44	30.55	478.39	22.44	35.24	5.91	617.29
750	540	165	81	110*	55	80	30	300	–	254	18	8	22	14	100	–	–	–	610	972	150	400
30”	21.26	6.50	3.19	4.33	2.16	3.15	1.18	11.81	–	10.00	0.71		0.87	0.55	3.94	–	–	–	24.02	38.27	5.91	881.85
800	560	190	81	110*	55	80	30	300	–	254	18	8	22	14	100	640	882	310	640	1010	170	400
32”	22.05	7.48	3.19	4.33	2.16	3.15	1.18	11.81	–	10.00	0.71		0.87	0.55	3.94	25.19	34.72	683.57	25.19	39.75	6.69	881.85
900	665	203	–	110	–	100	30	300	–	254	18	8	28	16	100	700	1000	448	700	1152	190	543
36”	26.18	7.99	–	4.33	–	3.94	1.18	11.81	–	10.00	0.71		1.10	0.63	3.94	27.56	39.37	987.87	27.56	45.35	7.48	1355.83
1000	715	216	–	110	–	100	30	350	–	298	22	8	28	16	100	750	1105	530	750	1240	190	660
40”	28.15	8.50	–	4.33	–	3.94	1.18	13.78	–	11.73	0.87		1.10	0.63	3.94	29.53	43.50	1168.69	29.53	49.02	7.48	1455.04
DN > 1000 (40”) : FLOVAR

Dimensions in mm, weights in kg.

Dimensions and weights are given as a guide.

On request.

Plate

Standardised to adapt any type of actuator, conform to ISO 5211 standard.

Chevron Seal

Made in nitrile. This device avoids atmospheric contamination.

Bearings

Self-lubricating bearings made of PTFE reinforced on a metallic support. These bearings provide a true shaft guide and ensure absolute shaft rigidity during operation.

Shaft

Inside the disc, it is completely insulated from the liquid being conveyed.

FACE TO FACE

Dimensions conforming to:

EN 558

API 609 BS 5155

MSS SP 67 DIN 3202-K1

ISO 5752-20 NF E 29305-20

FLANGE STANDARDS

ANSI B 16.5 class 150

BS 4504

BS 10 Table E

ISO 2084

DIN 2501

MSS SP 44

JIS B 2210

NFE 29203

BUTTERFLY VALVES – WAFER & LUG TYPES

PART LIST

Rep	Nb	Designation	Material	Remarks
1	1	Body (Wafer or Full Lug)	Ductile iron	See options
2	1	Disc	ASTM A 395-76 grade 60-40-18	See options
3	1	Control shaft	Stainless steel with 13% chromium	See options
4	1	Spindle	Stainless steel with 13% chromium	See options
5	1	Seat	EPDM	See options
6	3	Self-lubricating bearings	Reinforced PTFE on steel
7	1	Safety nut	Steel + polyamid	Phosphated
8	1	Protection plug	Polyethylene or steel
9	1	Chevron seal	Nitrile
10	1	Thru-bolt	Galvanized steel
11	1	Key	Steel	For DN ≥ 250 (10”)
12	1	Coupling	Stainless steel with 13% chromium	For DN ≤ 125 (5”)
13	1	Identification plate	Aluminium
14	2	Rivet	Steel

NOTA: possible neck extension for insulation.

BUTTERFLY VALVES – WAFER & LUG TYPES

DESCRIPTION

Standard

Other executions

Body

Cast ductile iron:

ASTM A 395 Gr 60.40.18

Carbon steel: ASTM A 216 WCB

Stainless steel: ASTM A351-CF3M

Cast ductile iron:

ASTM A 395 Gr 60.40.18

Epoxy or Rilsan coated nickel plated

Cast ductile iron 60.40.18
EPDM or NBR rubber coated DN ≤ 300 (12”)
Natural rubber coated DN > 300 (12”)
Halar® coated

Disc

Cupro-aluminium:

Cu Al 9 Ni3 Fe2 DN ≤ 200 (8”)

Cu Al 10 Ni5 Fe5 DN ≥ 250 (10”)

Z3 CND 17-11-02 DN ≤ 200 (8”)

Z6 CND 18-12 M DN > 200 (8”)

Polished on request

Monel 400®

Uranus B6®

Other types on request

Stainless steel: AISI 420

Stainless steel : AISI 17.4 PH

Shaft and spindle

Monel

Cupro-aluminium

Seat

EPDM-S (- 15 + 95 ̊ C*)

EPDM (- 15 + 130 ̊ C)

Nitrile NBR (- 15 + 80 ̊ C)

Nitrile X-NBR (- 15 + 60 ̊C)

EPDM white (- 15 + 130 ̊ C)

Fluorated elastomer (- 15 + 130 ̊ C)

Hypalon CSM® ( -15 + 80 ̊ C)

Therban (- 15 +140 ̊ C)

External body coating

Epoxy + paint

Epoxy Any other coating on request

® Registered trade mark.

ASTM Grades are approximate and given as an indication

According to the type of fluid and service conditions

STANDARD KNIFE GATE VALVES DESIGN FEATURES ADVANTAGES OVERS FABRICATED VALVES

Cast stainless steel body and investment cast yoke. In fabricated valves, leakage of corrosive medium due to neglected maintenance on the packing, or line pressure surges causes corrosion and failure of most carbon steel or cast iron components.
An all stainless steel valve offers better corrosion resistance than cast iron lined valves. The total cost of ownership becomes more attractive than the initial savings.:

FIRST ALL STAINLESS STEEL KNIFE GATE VALVE

Rugged one-piece body including flanges. Cast in stainless steel to eliminate corrosion problems that are found with cast iron, or steel valves lined with stainless steel.
All stainless steel investment cast yoke. Up to 12”.
Investment cast stainless steel packing flange the space between the blade and the packing flange is very small and critical on smaller size valves. For 2-8” Enpro knife Gate Valves feature high precision investment cast packing flanges for a tight “contact-free” fit.